Ubiquiti UA-G2-SK Access G2 Starter Kit

Overview
In the Box
(1) Door Hub
(1) G2 Reader
(10) Access Cards

Door Hub

Dimensions
174.9 x 126 x 32.9 mm
(6.9 x 5 x 1.3″)

Supported Doors
1

Input Terminals
(2) Door exit request
(1) Door position
(1) Emergency

Power Method
PoE++
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU

NDAA Compliant
✓

UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I

Weight
363 g (12.8 oz)

Enclosure Material
Polycarbonate

Mount Material
Polycarbonate

Mounting
DIN-rail (Included)

Ambient Operating Temperature
0 to 40° C (32 to 104° F)

Ambient Operating Humidity
5 to 95% noncondensing

Networking Interface
(5) 10/100/1000 Base-T

PoE Interface
(1) PoE++ input, 50V DC, 1A
(4) PoE outputs, 50V DC, 15.4W per port (Max. 28W aggregated)

Max. Power Consumption
30W (Without PoE output)
50W (With PoE output)

Digital Input
Request to exit, request to enter, remote release, door position sensor

Dry Output Relay
Lock: 30V DC, 1A
Aux: 30V DC, 1A

Powered Output Relay
Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A

LEDs
B/W Learn More

Button
(1) Factory-reset

Recommend Max. Cable Length
UA-Lock-Electric (400mA)
24 AWG length: 25 m (82 ft)
22 AWG length: 42 m (138 ft)
20 AWG length: 66 m (217 ft)
18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)

UA-Lock-Magnetic-540kg (500mA)
24 AWG length: 20 m (66 ft)
22 AWG length: 32 m (105 ft)
20 AWG length: 51 m (167 ft)
18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)

UA-Lock-Magnetic-270kg (800mA)
24 AWG length: 12 m (29 ft)
22 AWG length: 20 m (98 ft)
20 AWG length: 30 m (167 ft)
18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)

Other locks (1A)
24 AWG length: 9 m (30 ft)
22 AWG length: 15 m (49 ft)
20 AWG length: 24 m (79 ft)
18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)

PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

UL 294 Statement
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade
Grade assignment: 1

Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level
UA-Hub-Door002, V01

G2 Reader

Dimensions
93 x 40 x 36.5 mm
(3.7 x 1.6 x 1.4″)

NFC Card & Keyfob Access
✓

Mobile Unlock
✓

Handwave Request to Exit
✓

Weatherproofing
IP55

NDAA Compliant
✓

UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I

Weight
82 g (2.9 oz)

Enclosure Material
Polycarbonate, glass

Mount Material
Aluminum alloy

Mounting
In-wall, gang box (Included)
Junction box (Optional)

Indoor and Outdoor Use
✓

Ambient Operating Temperature
-30 to 45° C (-22 to 113° F)

Ambient Operating Humidity
5 to 90% noncondensing

Networking Interface
(1) 10/100 MbE RJ45 port

Connectivity
BLE 4.1
NFC

Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU

Max. Power Consumption
5W

Supported Voltage Range
48V DC

ESD/EMP Protection
Air: ±15kV, contact: ±8kV

Sensors
Proximity sensor

Speaker
(1) Yes, 0.7W

LEDs
R/G/B/W Learn More

Button
(1) Factory-reset

NFC Read Range
< 30 mm (1.18”)

NFC Frequency
13.56 MHz

NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T

PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade
Grade assignment: I

Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level
UA-G2/UA-G2-Black, V02

Access Card

Dimensions
85.6 x 53.98 x 0.84 mm
(3.37 x 2.13 x 0.03″)

Weight
5 g (0.18 oz)

Format
ISO 7810 ID-1

NFC Frequency
13.56 MHz

NFC Technology
ISO/IEC 14443 Type A
MIFARE DESFire
UniFi Access Proprietary Security Protocol

NDAA Compliant
✓