UPS EATON E SERIES DX6000HXL

⚡ Power & Topology

• Rating: 6 kVA / 4.2 kW

• Topology: Online, double-conversion (true sine-wave output)

• Power Factor (output): 0.7

• Efficiency: > 88% in normal mode; ECO mode higher

🔌 Input & Output

• Input Voltage Range: 122 V – 300 V (wide immunity to fluctuations)

• Input Frequency: 50 / 60 Hz (auto-sensing)

• Voltage Regulation: ±1%

• Output Voltage Options: 208 / 220 / 230 / 240 VAC

• Crest Factor: 3:1

• Critical Load Transfer Time: 0 ms (online UPS)

• Bypass Configuration: Internal static bypass plus optional manual bypass

🛋 Battery & Runtime

• Battery Type: Internal, sealed lead-acid (AGM), 20 × 12 V (240 VDC)

• Cold-Start Support: Yes (can start on batteries alone)

• Typical Runtime:

  • ~19 minutes at full load (~4.2 kW)

  • Longer at reduced loads

• Recharge Time: Typically <7 hours to 90% capacity

🧰 Communications & Monitoring

• LED Indicator Panel: Utility, Inverter, Bypass, Fault, Load/battery bars

• Communication Ports: RS‑232, Intelligent-Slot (for SNMP, AS/400, dry contacts), dry contacts

• Parallel Capability: Supports up to 3 units in parallel (N+1 redundancy)

• Software Compatibility: Eaton WinPower

🛠 Protection & Features

• Input Power Factor: ≥ 0.98

• Total Harmonic Distortion (THDi): <10%

• Overload Handling:

  • 105–125% load: holds ≥ 1 minute

  • 125–150%: ≥ 10 seconds

  •  150%: switches to bypass in <1 s

• Generator compatibility: Yes

• Audible & Visual Alarms for faults, low battery, overload, bypass

• Automatic bypass in case of faults or overload

📏 Physical & Environmental

• Form Factor: Tower

• Dimensions (H×W×D): 717 × 260 × 570 mm

• Weight: ~84 kg

• Operating Temperature: 0 °C – 40 °C

• Noise Level: <55 dB at 1 m

• Humidity: 5–95% non-condensing

• Altitude: Rated up to 1,000 m (higher altitudes require derating)